3 Phase Primary Current Injection Test System

3 Phase Primary Current Injection Test System

Up To 5000A 3 Phase Primary Current Injection Test System I. 3 Phase Primary Current Injection Test System Overview HZ-139S three-phase Primary Current Injection Test System adopts aluminum alloy chassis, PC panel, beautiful appearance; using high-quality annular riser, large output capacity,...

Send InquiryChat Now
Product Details

3 Phase Primary Current Injection Test System

I. 3 Phase Primary Current Injection Test System Overview

HZ-139S three-phase Primary Current Injection Test System adopts aluminum alloy chassis, PC panel, beautiful appearance; using high-quality annular riser, large output capacity, small size and light weight. Built-in ARM chip control, using a large LCD screen digital display, while showing a primary current and a fixed voltage value. Automatic overload protection, intuitive display, convenient reading; at the same time with three-phase voltage output, automatic electronic protection. Mainly applicable to the three-phase system primary circuit test, can also be used for CT ratio test, contact resistance requires high current output occasions.

 

II. 3 Phase Primary Current Injection Test System the main performance indicators

2.1 Input Power: Three-phase four-wire AC380V/220V·20A, 50Hz.

2.2 Output current: AC 0 ~ 300A · 15V / phase, the output current exceeds 330A, automatically cut the output.

2.3 rated voltage output: AC 58V · 3A / phase.

2.4 LCD digital current and voltage meter:

Range: 0 ~ 350A; Resolution: 0.1A; Accuracy: True RMS ± 0.5%;

Range: 0 ~ 100V; Resolution: 0.1A; Accuracy: True RMS ± 0.5%.

2.5 Dual protection (overload electronic protection and software protection).

2.6 use of the environment: Temperature -1040 °C, relative humidity <80%.

2.7 Volume: Three-phase voltage regulator: 280mm × 220mm × 450mm;

High current tester: 610mm×240mm×290mm.

2.8 Weight: Three-phase regulator: 25kg; Large-current tester: 45kg.


FAQ

1. What's the warranty?

Normally 12 months

 2.Does the power supply can customized?

YES ,if you need customized power supply,pls tell us when you put the order.

 3.What's the production time?

Usually 20 days for production, some equipments need extra time to debug.

 4.What's the Dlivery method ?

Light-weight cargo is usually by express , Air transport and sea shipping is acceptable (provide with safty packing)

 5.What's the delivery time?

According to different method and country , express will be 6~15 days

 6. How to install and operate?

According to each instruction manual which sent with equipment. ( We also provide after-sale technical support)

 7.What's the payment term?

Normally 30% paid by T/T in advance and 70% paid by T/T before shipping by air.Or 100%T/T.Other payment term is negotiable,like Western union,Papal.

flash point tester 

relay test.jpg


Hot Tags: 3 phase primary current injection test system, made in China, manufacturers, discount, cheap, Primary Current Injection Test System, 3phase primary current injection test set, primary current injection test procedure
Related Products
Inquiry